When you’re preparing to buy or sell a home, one document can mean the difference between a smooth closing or costly, last-minute delays: the Real Property Report (RPR).
But an RPR isn’t enough on its own. To truly complete the process, your RPR needs to earn a Certificate of Compliance from the City of Calgary.
In this guide, we’ll help you understand what compliance means, what could prevent your property from getting approved, and what to do if your RPR gets flagged. Whether you’re a realtor, lawyer, or landowner, these insights will help you evade avoidable issues and keep your transaction moving forward.
Understanding Compliance and Real Property Reports
What is a Certificate of Compliance?
A Certificate of Compliance is an official stamp issued by the City of Calgary (or relevant municipality) stating that all permanent structures on a property meet local land use bylaws. It’s issued after the municipality reviews your Real Property Report to confirm everything — including buildings, decks, sheds, fences, and air conditioning units — is properly located within legal boundaries and required setbacks.
As Mark Sutter puts it: “A certificate of compliance allows the seller to say to any prospective purchaser, ‘I have nothing to hide.’”
It protects both buyers and sellers. The buyer gains peace of mind. The seller avoids future disputes, delays, or liability.
Why Do You Need a Compliance Stamp in Calgary?
A compliance stamp is required to complete most property sales in Calgary. It tells all parties — buyer, seller, lawyer, and mortgage lender — that the property is legally positioned and doesn’t need further municipal approvals.
Without it, the City can “red-stamp” your report, flagging issues that could delay your sale, trigger additional paperwork, or even require construction changes. Worse, a flagged RPR can show up just days before closing, throwing your deal into jeopardy.
Requirements for Obtaining a Certificate of Compliance
Setback Requirements for Structures in Calgary
Setbacks are minimum distances structures must be from the property lines. These vary by zoning and location, but some general rules include:
-
- Decks over 0.6m (2 ft) must be 1.2m from the side yard and 7.5m from the back property line
-
- Side yard restrictions are typically 0.6m for features like eaves, decks, or cantilevers
-
- Front setbacks vary by neighbourhood (usually between 4–6m); compare neighbouring homes
-
- Anything within 20 cm of the property line is typically treated as “on line,” but that doesn’t guarantee compliance
Structures that fall into setbacks, especially attached additions like sunrooms, are common reasons for denial.
Sheds, Garages, and Accessory Buildings Regulations
-
- Sheds and pergolas over 10m² cannot sit on easements or utility rights-of-way (URWs) and must be at least 1m from the main house
-
- Attached sheds are considered additions and may trigger compliance failure
-
- Air conditioning units cannot be located at the front of the property and are often forgotten until it’s too late
-
- Retaining walls and widened driveways are also scrutinized, especially if they cross into lanes or streets
Always confirm what’s attached, what’s permanent, and where it’s placed.
Understanding Land Use Bylaws and Zoning Compliance
Calgary’s zoning rules define where and how buildings can be placed. The compliance review checks:
-
- Property zoning
-
- Structure placements (permanent vs. moveable)
-
- Use of overland drainage and utility easements
-
- Conformity with development permits, if applicable
Even small changes like replacing a deck, adding a shed, or installing an AC pad can cause a property to fall out of compliance.
What Happens If Your Property Does Not Meet Compliance?
Understanding Compliance Review Outcomes
When you or your land surveyor submits your RPR to the City, you may receive one of the following:
-
- Certificate of Compliance (stamp): Your property is clear
-
- Encroachment Advisory: A structure crosses a legal boundary (e.g., into a right-of-way)
-
- Requirement for Development Permit: The city deems something to require formal municipal approval
Each of these has a different path forward.
What to Do If Your Real Property Report is Non-Compliant
If your RPR is flagged, don’t panic. You still have options:
-
- Development-related issues may require a Development Permit (DP) to request a relaxation of the bylaw that is being violated.
-
- Environmental reserves or protected easements have strict rules. Removal or alteration may be impossible.
Third Rock can help you understand what’s required and offer guidance or services to resolve issues quickly.